Royal TS4240 - Programming Plus Without a Barcode Reader

Chapter 4 Setting Up Your Cash Register - the Basics
39 TS4240 User’s Guide
information about setting inventory, see System Options Settings on
page 53.
7 Optionally, if the inventory function is active, set or edit the inventory
safety margin count.
8 Optionally, map PLUs to direct PLU keys. See Mapping PLUs to Direct
PLU Keys on page 40.
The rest of this section explains the above steps.
Important
Do not press the Decimal point key when entering a price.
After you are done, you can check your results. See Running the PLU
Confirmation Report on page 82.
Programming PLUs without a Barcode Reader
You can program PLUs without using a barcode reader. Use the following
instructions.
Important
When programming PLU alpha descriptions, if you enter the wrong
character, press the back space key to delete the character. Now you can
continue.
To program PLUs without a barcode reader
402 -- PLU Setting
1 Put the MGR key in the Mode key slot and turn it to the PROG
position. If prompted, enter the Manager passcode and press Enter.
2 Press the Arrow Down key to select 402 -- PLU Setting. Press Enter.
3 Press the Arrow Down key to select Add New PLU or Edit PLU. Press
Enter.
4 Using the Number keys, enter the PLU number. Press Enter.
5 Follow the instructions on the display
6 To program the next PLU, go to Next Item and press Enter.