Royal TS4240 - Page 33

TS4240 User’s Guide 26
Setting Header Messages and Footer Messages
3 Complete the chart, filling in extra unused characters with blank spaces.
The text for each line is automatically centered.
Remember, you can make the characters double width but you can only
use half the total number of characters if you do this. For example, if you
want Coffee to be double wide, you need 12 characters. For more
information about double wide characters, see Using Double Wide
Characters on page 24.
This is an example of the programmed header message:
To add a space between words, press the Space key.
Important
If you enter the wrong character, press the Backspace key to delete the
character. Now you can continue.
To program header messages or footer messages
405 -- Text MessageHeader Message or Footer Messages
1 Put the MGR key in the Mode key slot and turn it to the PROG position.
If prompted, enter the Manager passcode and press Enter.
2 Press the Arrow Down key to select 405 -- Text Message. Press Enter.
3 Press the Arrow Down key to select Header Message or Footer Message.
Press Enter.
4 Select the line you want to program.
5 Follow the instructions on the screen.
Line 1
INTERNATIONAL COFFEES
Line 2
999-555-1212
Line 3
222 EAST MAIN STREET
Line 4
OPEN 7AM TO 6PM
Line 5
COFFEES OF THE WORLD
INTERNATIONAL COFFEES
999-555-1212
222 EAST MAIN STREET
OPEN 7AM TO 6PM
COFFEES OF THE WORLD