SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
F@ST 4310 Reference Manual Page 5-101
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
WPA
Object: This encryption mode applies the functionalities of the WPA protocol and requires the use of a
"RADIUS" authentication server.
• Select the WPA security from the scroll down list; the following screen appears:
Network Key x
(1 to 4)
1
This field is empty or displays the key value
entered earlier (greyed out)
[Not modifiable]
2
Enter the encryption on the key you selected in
the "Current Key".
1234567890123
3
Enter the encryption on the key you selected in
the "Current Key".
1234567890123
4
This field is empty or displays the key value
entered earlier (greyed out).
[Not modifiable]
Field Action/Meaning
Default
value
WPA Group Rekey
Interval
Enter a value (in seconds) which determines the period
after which the WPA key will be regenerated
(Renewing) in broadcast / multicast (LAN broadcast).
0
RADIUS Server IP
Address
Enter the IP address of the "RADIUS" authentication
server.
0.0.0.0
RADIUS Port
Enter the port used for the "RADIUS" authentication
server.
1812
RADIUS Key
Enter the secret key shared between the authentication
server and its clients
-
Field Action/Meaning Default value

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English