SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
Page 5-44 F@ST 4310 Reference Manual
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
• Click on the Next button to continue configuring the remote network (WAN) in IPoA mode.
• Click on the Next button to continue configuring the remote network (WAN) in IPoA mode.
Field Action Default value
Enable NAT
Check the box to activate the NAT function.
Note: NAT is a configurable IP address
translation function which will be applied
to the interfaces of your router which you
will have activated for this function.
Not checked
Enable Fullcone NAT
a
a. This field only appears when the "Enable NAT" field is activated (box checked).
Check the box to activate the Fullcone NAT
function.
Not checked
Enable Firewall Check the box to activate the Firewall service. Not checked
Enable IGMP Multicast Check the box to activate the IGMP function. Not checked

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English