178 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
Option Entry Description
MGR REQUIRED TO
OPEN CHECKS
Y or N Set this field to Y in a charge posting environment.
New checks can be assigned in manager mode.
ALLOW Z CLERK TIME
REPORT IF EMPLOYEES
ARE CLOCKED IN
Y or N Option available at firmware version 1.031 or later.
Allows clerk report even when employees are still
clocked in.
MGR REQUIRED TO
ADD NEW CHKS
Y or N Option available at firmware version 1.035 or later. If
set to Y, The manager is required to start a new check
but the clerks can access it without the manager key
CANADIAN ROUNDING
ON CASH
Y or N Option available at firmware version 1.043 or later.
Rounds cash transaction total to the nearest .05¢
EFT SUPPORT NEW
EMV PROTOCOL
Y or N Select “Y” when integrated payment equipment is setup
to accept EMV (chip cards). Requires v1.116 or later.
To Next Page
Loading...
