Sam4s SPS-320 - Page 181

Sam4s SPS-300 OP Manual v1.35 Program Mode Programming • 177
Option Entry Description
USE TRACK 1&2
USE TRACK 3&4
0 or 1 Select the tracks read by the card reader: 1 and 2 or 3
and 4.
RESERVED
STORE NAME 8 characters Stored files will be saved on SD/USB under a folder
with the store name. The default store name is
“STORE_A”. Do not include spaces in the name.
MIX & MATCH IS
TAXABLE
Y or N If Y, mix and match discounts are taxable, resulting in
tax being applied to the net sale amount, rather than the
gross amount.
BACK LIGHT COLOR 0-7 0=ON (standard light blue backlight)
1=RED; 2=GREEN; 3= BLUE; 4=RED+GREEN;
5=GREEN+BLUE; 6=RED+BLUE
7=OFF (no backlight)
SELECT LANGUAGE 0, 1, 2 Converts system descriptors to selected language
PUERTO RICO RJ FLAG Y or N` For Puerto Rico Only.
ALLOW PRICE LEVEL
ONLY MGR MODE
Y or N Choose Y to require the X Mode key to operate the
Price Level keys.
DISPLAY ADD PRICE OF
LINKED ITEMS
Y or N When Y, the customer display shows a total of the item
and linked item. For example, if PLU is $1.00 and is
linked to PLU2 which is $0.25, the customer display
will show $1.25.
ALLOW SALE WITH 0
STOCK
Y or N When N, inventory PLU’s cannot be sold when stock
reaches "0".
ALLOW Z STOCK RPT Y or N When N, the operator is not allowed to clear (Z) stock.
EFT DRAFT IS Y or N Set EFT DRAFT to Y (DATATRAN) for a normal
draft. Set EFT DRAFT to N (FINE DINING) for a
draft with a tip entry line.
MSR CONNECTED 0, 1, or 2 Set MSR CONNECTED to 0 if the MSR is connected
to the DATATRAN. Set to 1 if the MSR is connected
to the PDC. Set to 2 if connected to the register.
PIN PAD TYPE Y or N Choose Y. (DUKPT is only type supported.)
PIN PAD (0-4) 0-4 Indicate port where PIN PAD is connected.
NO SIGN IF TRANSANC-
TTL LESS THAN 0.00
00.00 No signature requires if EFT transaction is under
amount set here. (i.e. if 20.00 is set here, no signature
is required on transactions under $20.00.)
DATATRAN WAIT
VALUE ON REMOTE
REGISTER
0 A setting at this field may be required in IRC system of
two or more SPS-300 registers where a DialTran
(telephone line authorization) and other peripherals are
shared. If an “INVALID ENTRY—TIME OVER”
message is displayed at a remote register, contact CRS
Technical Support for assistance is setting this field.