Samoa NEXU - Tank Level Monitor Module (Ut Ank ); Central Processing Unit (un Et )

NexU
INSTALLATION MANUAL
The UPulser is a h
igh accuracy line pulse
meter. It is e
quipped with connection
terminal and valve open indication light.
It can only be connected to a UC
module. This meter does not have a
display or function buttons
a display or function buttons and requires
a 24 V DC solenoid valve
2.9
TANK LEVEL MONITOR MODULE
This module is
capable of controlling two
tanks. When mounted in a NEX·U·®
system it keeps real time inventory and
increases operation safety preventing air
entering pumps when the tank is empty
and overflow during clean oil delivery and
in waste oil storage tanks. It c
used to control the
general air supply to
the pumps and the air supply for each
pump.
The UTank has two independent g
displays and level bars, each of them
shows the inventory
available in each
tank. It also has a set-
inventory
adjustment if required.
2.10
CENTRAL PROCESSING UNIT
The UN
et is the key NEX·U·® component.
It is the central processing unit that
controls the system c
ommunications and
houses the UT
rack software.
be connected to the customer
network.
The UN
et includes a powerful 2.4 GHz
processor and 4 GB RAM. It controls the
system functions and it manages the
wired and wireless communication
between the NEX·U·® components.
It has two CAN bus ports (in/out) for
wired communications
and an ethernet
port that allows UN
et to connect to an
existing Wi-
Fi® network or to create a
dedicated Wi-Fi® network
INSTALLATION MANUAL
igh accuracy line pulse
quipped with connection
terminal and valve open indication light.
It can only be connected to a UC
ount
module. This meter does not have a
a display or function buttons and requires
TANK LEVEL MONITOR MODULE
(UTank)
capable of controlling two
tanks. When mounted in a NEX·U·®
system it keeps real time inventory and
increases operation safety preventing air
entering pumps when the tank is empty
and overflow during clean oil delivery and
in waste oil storage tanks. It c
an also be
general air supply to
the pumps and the air supply for each
The UTank has two independent g
raphic
displays and level bars, each of them
available in each
up keypad for
adjustment if required.
CENTRAL PROCESSING UNIT
(UNet)
et is the key NEX·U·® component.
It is the central processing unit that
ommunications and
rack software.
This has to
be connected to the customer
computer
et includes a powerful 2.4 GHz
processor and 4 GB RAM. It controls the
system functions and it manages the
wired and wireless communication
between the NEX·U·® components.
It has two CAN bus ports (in/out) for
and an ethernet
et to connect to an
Fi® network or to create a
Rev 3 (XXXX 2019)
8