Rev 3 (XXXX 2019)
NexU INSTALLATION MANUAL
77
6.2.6 NETWORK
In this menu you can set all the data for linking NexU to the customer’s network.
The requested data are:
IP Address
Mask
Gateway
DNS (just in case the user wants to send emails when an alarm is reached)
IMPORTANT: Once you have set the previous parameters of the network, the
192.198.1.100:4000 address is broken. You would need to get into the
customer network and access to UTrack by inserting the new IP address in
the browser.
To Next Page
Loading...
