EasyManua.ls Logo

Samoa NEXU - 5 Nexu Requirements

Default Icon
107 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rev 3 (XXXX 2019)
NexU INSTALLATION MANUAL
55
5 NEXU REQUIREMENTS
In order to install a UNet the following requirements are needed
110 VDC or 240 VDC (50 Hz / 60 Hz) power mains
An Ethernet connection
A fixed IP address (supplied by the customer). By setting this IP, the
customer will be able to operate on the UTrack.
By default the IP on the UTrack is 192.168.1.100:4000

Table of Contents

Other manuals for Samoa NEXU