Rev 3 (XXXX 2019)
NexU INSTALLATION MANUAL
105
12 HOSE REEL CALIBRATION
Go to the configuration menu, two consecutive access codes are required. The first one
is .... (four dots) and then the system will ask for another one which is NEXU. You will
go to the following screen
Then go to “Calibration” and follow the next steps
Introduce the hose reel you want to calibrate.
Introduce the volume of the calibrated measure in which the calibration.
Press “Start”.
Deliver the quantity that was set in the “Requested Quantity” field.
Once you have reached the quantity defined in the “Requested Quantity” field, please
press Enter.
To Previous Page
Loading...
