Rev 3 (XXXX 2019)
NexU INSTALLATION MANUAL
61
6.2.1 PRODUCTS
In this screen you have to define the products of the installation.
Press the icon (upper right part) and a popup window appears.
Part Number: This is the part number of the product and has to be the same as the
one defined in the customer DMS (This parameter is compulsory)
Name: This is the name of the product and has to be the same as the one defined in
the customer DMS (This parameter is not compulsory)
Product Brand: To be developed in the future.
Provider: This is the provider of the product (This parameter is compulsory)
Density: This is the density parameter and has to be inserted in kg/cm3. This
parameter is compulsory if the installation has a UTank.
Viscosity: This is the viscosity parameter and has to be inserted in cPs
Unit: In this screen you have to define the unit you want to work. There are two
options. Litres and Gallons.
To Next Page
Loading...
