44
Computer Input
This function is used to adjust keystone distortion of the projected
image. Use the Point Ÿź buttons to choose the item you want to
adjust.
Keystone
This function returns all adjusted values to the factory default
settings. Press the SELECT button at Reset to display a
confirmation box. To reset, press the SELECT button at “Yes.”
Ceiling
Rear
When this function is set to On, the picture will be top/bottom and
left/right reversed. This function is used to project the image from a
ceiling-mounted projector.
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from rear of
the screen.
Keystone
Ceiling
Rear
Reset
Adjust the Horizontal/Vertical keystone distortion of the projected
image.
Standard
Corner correction
Adjust the corner distortion of the projected image.
Corner pattern
Choose a Corner pattern mode among Red, White, Blue,
and Off.
Store
Store ....... Keep the keystone correction even when the AC
power cord is unplugged.
Reset ....... Release the keystone correction when the AC
power cord is unplugged.
Press the KEYSTONE button on the remote control to switch the
Standard (for Vertical/Horizontal) /Corner correction adjustment. The
Standard or Corner correction adjustment dialog box appears. Use the
Point ŸźŻŹ buttons to correct the Standard or Corner distortion.
(p.31)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
