SATO S84NX - Page 120

Back to top 5 Installation of Options
S84NX/S86NX Service Manual
118
Notes on assembling
• The W-LAN PCB has two coaxial connectors, so connect
the coaxial cable to the correct one as shown.
5
Remove a hexagon nut (
5
), and then remove a washer (
6
) and the antenna sub (
7
).
7
5
6
Notes on assembling
• Align the concave part (
8
) of the antenna sub with the convex part (
9
) of the IF plate.
8
9

From here, assembling procedure
6
Assemble the parts in the reverse order of the disassembly procedure.

Wi-Fi Settings
Refer to
2.3.4 WiFi Ex-Setting