S84NX/S86NX Service Manual
139
Back to top 6 Troubleshooting
Error Number Type of Error Error Icon LED Buzzer
1029
Cover Open Light in red
Short
sound,
3 times
Message Cover is open. Close cover.
To clear the display Close the top cover.
Causes
1) The top cover is open.
2) Close the top cover.
Countermeasures
1) Cover open switch is malfunctioning.
2) Replace the top cover sensor
1035
I-mark Not Found Light in red
Short
sound,
3 times
Message Adjust sensor settings to match label type or clean sensor.
To clear the display Press the left select button (OFFLINE) or open/close the print head.
Causes
1) Meandering media.
2) A label is attached to the media sensor.
3) The media sensor type is incorrect.
4) The media sensor level is incorrect.
Countermeasures
1) Load the media correctly.
2) Clean the media sensor.
3) Set the media sensor type which is compatible with the media you use.
4) Adjust the media sensor level.
1046
EAP Authentication Error
(EAP Failure)
Light in red
Short
sound,
3 times
Message Erroneous Wi-Fi settings. Adjust settings.
To clear the display Change the Wi-Fi settings or press the left select button (OFFLINE).
Causes EAP Authentication failure.
Countermeasures Use the correct Wi-Fi settings.
To Next Page
Loading...