Set up printer ports for each user.
About COM port (USB in P-OCR Mode) means
that generally COM port is used and USB ports
are used at the same time in P-OCR mode.
4 Customer display
Set up the Customer Displays to be connected to Display A/ B Ports.
1) Display A: Set up a Customer Display for Display A.
2) Display B: Set up a Customer Display for Display B.
3) Display to use: set up a using Customer Display.
Caution) In case of set up concurrent user,
Display A is for left user, and Display B is for
right user. This is “Default setting,” but user can
set up the display for each user.
4) Each User
Set up the Customer display for each user.
Value setting
1. CF level
In this menu, user can set the levels such as UV (Ultra-Violet) Sensor, MR (Magnetic Reader)
Sensor and IR (Infrared) Sensor required detecting each currency. The setting method is as follows.
(FIG7-04)
To Next Page
Loading...