schmersal PSC1-C-10 Series User Manual

Installation manual
HB-37350-810-01-50F-EN PSC1-C-10 Installation manual V2.1.docx Page 11 of 189
Version: 50F
Abbreviation
Meaning
PAA
Prozessabbild der Ausgänge (Process image of the
outputs)
PAE
Prozessabbild der Eingänge (Process image of the inputs)
PES
Programmable electronic control
Pilot duty
UL Rating
Qx.y
(1)
Digital Output
T0,T1
Pulse outputs
TB(1)
T bus connector (backplane bus)
PELV
Protective Extra Low Voltage
PLC
Programmable Logic Controller
SD bus (on request)
Serial diagnostic bus for electronic Schmersal safety
switches
SDDC (in preparation)
Safe Device-Device Communication
SELV
Safety Extra Low Voltage
SMMC (on request)
Safe Master-Master Communication
SRP/CS
Safety related parts of a control system
SSI
Synchronous Serial Interface
SW
Software; here: safety-related application software
VDE
Verband der Elektrotechnik, Elektronik und
Informationstechnik e. V.
Yx.y
(1)
Auxiliary output
(1)
Module address x = 0 ….. 2
Channel address y = 0 ….. 39
3 Safety instructions
3.1 Intended use
The devices in the series PSC1-C-10 are programmable safety controllers for providing safety
shutdown and safety functions. The devices are intended for usage
- In EMERGENCY STOP systems,
- As a safety component in the context of the EC Machinery directive 2006/42/EC,
- As PES for risk reduction in the context of EN 61508,
- In safety circuits according to EN 60204-1 and EN 60204-32,
- As PES for functional safety in the context of EN 62061,
- As SRP/CS in the context of EN ISO 13849,
- As a devices for providing safety functions according to EN 61800-5-2,
- As a logic unit for signal conversion and signal processing in a two-hand circuit
according to EN 574.

schmersal PSC1-C-10 Series Specifications

General

Brand	schmersal
Model	PSC1-C-10 Series
Category	Control Unit
Language	English