HB-37350-810-01-50F-EN PSC1-C-10 Installation manual V2.1.docx Page 15 of 189
Version: 50F
3.5 Transport/storage
The instructions on transport, storage and correct handling are to be followed.
The climatic specifications as per the sec. "Technical data" are to be met.
Device types
The series PSC1-C-10 comprises
- The basic devices PSC1-C-10, PSC1-C-10-SDM1, PSC1-C-10-SDM2
- The expansion modules PSC1-E-31…, PSC1-E-33…
- The decentral (in preparation) expansion module PSC1-E-37…
- The integrated communication interface (optionally with safe fieldbus) PSC1-C-10-…-
FBx
(1)
Basic devices
The series PSC1-C-10 is a compact safety controller with optionally integrated drive
monitoring for one (PSC1-C-10-SDM1) or two (PSC1-C-10-SDM2) axes. The device is freely
programmable for the safe processing of EMERGENCY STOP buttons, two-hand controls,
light barriers, operating mode selector switches, etc. and also drive-related safety functions.
For the safety-related signal processing, pre-configured blocks are available for a large
number of input devices. The same applies for safety functions for drive monitoring. You will
find details in the programming manual.
In the basic version the device has 14 safe inputs and up to 5/3 safe 2-channel shutdown
channels. (4x PP or 2x PN semiconductor outputs + 1x 2-channel relay output)
For safe speed and/or position acquisition, 1-encoder solutions and also 2-encoder solutions
are supported. See "Encoder specifications"
Expansion modules
Central or decentral (in preparation) I/O expansion for the PSC1-C-10 series.
A maximum of 2 expansion modules can be used.
Integrated communication interface
The communication interface provides bidirectional data transmission from and to a higher-
level controller using a standard fieldbus or safe standard fieldbus.
(1)
For version see: "Optional universal communication interface"
To Next Page
Loading...
Need help?
General
