schmersal PSC1-C-10 Series User Manual

Installation manual
HB-37350-810-01-50F-EN PSC1-C-10 Installation manual V2.1.docx Page 66 of 189
Version: 50F
4.2.2.4 Specific diagnostic measures in relation to the encoder type used
Encoder type
Supply voltage monitoring
Differential level monitoring
SIN/COS plausibility monitoring
Input signal level monitoring
Monitoring of the permissible quadrants
Monitoring of the count signal separately for track A/B
Monitoring of the reference signal / measured signal transmission ratio
Reference signal frequency monitoring
Reference signal voltage monitoring
Measured signa
l form factor analysis
Plausibility test, position signal versus speed
Clk frequency monitoring
Interface X 1/2, X23
Incremental
X
X
X
SIN/COS
X
X
SSI
X
X
Proximity switch 2 x
count input
X
Proximity switch 1 x
count input
X
Interface X
3/4(2)
Incremental
X
X
X
X
SIN_COS
X
X
X
1)
SSI
X
X
X
X
Options:
(1)
Only in the high-resolution mode
(2)
in preparation

schmersal PSC1-C-10 Series Specifications

General

Brand	schmersal
Model	PSC1-C-10 Series
Category	Control Unit
Language	English