schmersal PSC1-C-10 Series User Manual

Installation manual
HB-37350-810-01-50F-EN PSC1-C-10 Installation manual V2.1.docx Page 169 of 189
Version: 50F
Example software specification
Seq
. no.
Safety function
PL
r
Measured
value /sensor
New solution
Input/activation
Response/output
1.4
Monitoring V_rope in
relation to V_required
Monitoring of the
difference between main
drive speed and rope drive
for maximum value
d
Digital
incremental
encoder,
tacho generator
sheave
Monitoring using tested function SLS
+ SAC with comparison of speed
ranges / analogue value range =
comparison for diagnostics on the
speed acquisition
Shutdown 2-channel new (see
below)
Continuous
Reset:
Reset button
Operating stop
SF 1.3.1
1.6
Backstop
Monitoring for return
d
Mechanical limit
switch 22S2
Digital
incremental
encoder
Monitoring using tested function,
direction monitoring SDI
NOT (auxiliary
contact 28K4 –
inspection
movement)
Reset:
Reset button
Operating stop
SF 1.3.1
1.15
Stepwise shutdown 3
Activation of the safety
brake
e
-
Processing of SF in SafePLC2
SF 1.2
SF 1.3.2
SF 1.7
SF 1.8
Set safety brake
1.8
Functional standstill
d
Digital
incremental
encoder
Standstill monitoring using tested
function SOS
Controller disable
OR
Set service brake
SF 1.15/
Set safety brake
1.9
Direction monitoring
e
Digital
incremental
encoder,
Monitoring using tested function,
direction monitoring SDI
28K1 = FORWARD
28K2 = BACK
Operating stop
SF 1.3.1

schmersal PSC1-C-10 Series Specifications

General

Brand	schmersal
Model	PSC1-C-10 Series
Category	Control Unit
Language	English