schmersal PSC1-C-10 Series User Manual

Installation manual
HB-37350-810-01-50F-EN PSC1-C-10 Installation manual V2.1.docx Page 2 of 189
Version: 50F
Installation instructions for devices in the series PSC1-C-10
- PSC1-C-10
- PSC1-C-10-MC
(1)
- PSC1-C-10-FBx
(2)
- PSC1-C-10-SDM1
- PSC1-C-10-SDM1-MC
(1)
- PSC1-C-10-SDM1-FBx
(2)
- PSC1-C-10-SDM2
- PSC1-C-10-SDM2-MC
(1)
- PSC1-C-10-SDM2-FBx
(2)
and their expansion modules
- PSC1-E-31-12DI-10DIO
- PSC1-E-33-12DI-6DIO-4RO
- PSC1-E-37-14DI-4DO-2RO-RIO
(3)
Options:
(1)
Memory Card to store the configuration, the program and the data; see under:
(2)
For version see: "Optional universal communication interface"
(3)
in preparation
Note:
The German version is the original version of the installation instructions
As of: 05/2017
Valid from firmware release 5.0.0.1
Subject to technical change without notice.
The content of this documentation has been prepared with the greatest possible care and corresponds
to the latest information available to us.
Nevertheless, we draw your attention to that fact that this document cannot always be updated
simultaneously
with the technical further development of our products.
Information and specifications may be changed at any time. Please obtain information on the
latest version at: www.schmersal.net.
K. A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal

schmersal PSC1-C-10 Series Specifications

General

Brand	schmersal
Model	PSC1-C-10 Series
Category	Control Unit
Language	English