schmersal PSC1-C-10 Series User Manual

Installation manual
HB-37350-810-01-50F-EN PSC1-C-10 Installation manual V2.1.docx Page 22 of 189
Version: 50F
 Switchable safe outputs pn, pp switching for safety-related functions
 Complete speed and position-related safety functions for drive monitoring as per IEC
61800-5-2 integrated into firmware
o Spatial functions for safe speed and range monitoring possible
 Parameter administration for expansion modules in the basic device
 Comprehensive diagnostic functions integrated
 Coded status indication via 7-segment display and status LEDs on front
 Multi-function button (Quit, Start, Reset) can be operated from the front
 Optional: Universal communication interface
o Standard and safe fieldbus protocols for communication with a higher-level
controller
o Safe cross-communication (SMMC) for the exchange of data between several
basic devices
(2)
o Safe remote IO communication for the exchange of data with distributed IO
systems
(3)
o Serial diagnostic bus "SD bus" (on request)
See: Section 3.2.4.3 Optional universal communication interface
 Mounting on DIN rail
 The mechanical layout of the PSC1-C-10 (-FBx
(1)
/MC) is different to the figure. (See
mechanical data)

schmersal PSC1-C-10 Series Specifications

General

Brand	schmersal
Model	PSC1-C-10 Series
Category	Control Unit
Language	English