schmersal PSC1-C-10 Series User Manual

Installation manual
HB-37350-810-01-50F-EN PSC1-C-10 Installation manual V2.1.docx Page 48 of 189
Version: 50F
Safety instructions:
 For a safety-related assessment of the sensor sub-system, the information from the
manufacturer (MTTF
D
, PFH figures etc.) is to be used.
 The DC values stated in the table are to be used conservatively and compliance with
the boundary conditions (see "Comments" in table) ensured.
 Fault exclusions are allowed according to the applicable standards. The boundary
conditions listed are to be ensured over the long-term.
 If several sensor systems are necessary for the correct function of an individual safety
function, their partial values are to be combined correctly according to the method
selected.

schmersal PSC1-C-10 Series Specifications

General

Brand	schmersal
Model	PSC1-C-10 Series
Category	Control Unit
Language	English