Seat LEON 2024 - Page 159

Air conditioning
157
Stationary air conditioning
Note
Using the stationary air conditioning with-
out connecting the charging cable reduces
the vehicle’s range. At extreme exterior tem-
peratures, the heating or cooling power of
the stationary air conditioning may be insuf-
ficient to reach the desired temperature.
Managing the stationary air condi-
tioning
✓ Valid for: hybrid vehicles.
The stationary air conditioning only works if the
high voltage battery is suciently charged.
The stationary air conditioning can be used
without the charging connector being plugged
in. When the charging connector is not plugged
in, the stationary air conditioning receives the
necessary electrical power from the high-volt-
age battery.
Setting the desired temperature
●
Open the infotainment system’s Stationary
air conditioning menu.
●
Tap Air conditioning.
●
Set the desired temperature using and
Switching on the stationary air conditioning
It can be switched on in the following ways:
●
Press the immediate on icon
in the Info-
tainment system (while the vehicle is switched
o). During immediate air conditioning, the ve-
hicle reaches the set temperature in a maxi-
mum of 30 minutes.
●
Press the immediate on/o button in the My
SEAT App.
●
Automatically by scheduling a departure time
in the My SEAT App or in the infotainment
system in the Stationary air conditioning
›››page157menu.
Switching o the stationary air conditioning
In can be switched o in the following ways:
●
Press the immediate on/o button in the My
SEAT App.
●
Press the immediate on/o icon in the info-
tainment system (while the vehicle is switched
o).
●
Press the air conditioning o button in the Air
conditioning menu of the infotainment system
(while the vehicle is o).
●
Automatically, a few minutes after the sched-
uled departure time.
●
Automatically if the charge level of the vehi-
cle's high-voltage battery drops excessively.
Note
●
Noises will be heard while the stationary
air conditioning is running.
●
When the outside humidity is high and the
ambient temperature is low, condensation
from the air conditioning system may evapo-
rate when the stationary air conditioning is
running. In this case, steam may come out
from under the vehicle. This does not mean
that there is an fault in the vehicle.
Programming the stationary air con-
ditioning
✓ Valid for: hybrid vehicles.
The stationary air conditioning can be pro-
grammed in the Infotainment system for a
scheduled departure time. You can set the de-
sired temperature of the vehicle interior for the
vehicle’s planned departure time.
Based on the desired temperature, the vehicle
calculates the time that the stationary air con-
ditioning needs to be switched on to reach this
temperature by the departure time. The maxi-
mum pre-operation time of the stationary air
conditioning is approx. 30 minutes before the
departure time.
Air conditioning the vehicle for departure
●
Open the Stationary air conditioning menu.
●
Press Exit to open the timer menu.