Seat NAVI SYSTEM PLUS - Navigation Main Menu

Navigation
If the inserted memory card contains valid
navigation data, the following message ap-
pears: “The source contains a valid naviga-
tion database”. It is now possible to navigate
with the memory card data. When the memo-
ry card is no longer needed by the hardware,
it will be prepared for removal
›››
page 49.
Note
●
The inserted memory card must be pre-
pared before it is ejected
›››
page 49.
●
Press the Infotainment button

; then
press
Settings
to open the
System set-
tings
menu.
●
Navigation is not possible without the SD
card.
●
Do not remove the memory card while
the navigation data is in use. This could
damage the memory card!
●
The navigation memory card may not be
used as memory for other files. The info-
tainment system will not recognise the files
saved.
●
SEAT recommends only using original
SEAT memory cards to use navigation data.
The use of other memory cards could limit
its operation.
Updating and installing navigation
data
3 Only available for the model: Navi System Plus
The Infotainment system is equipped with an
internal navigation data memory. The re-
quired navigation data are already installed
on the system.
The Infotainment system always requires the
navigation data that is currently valid for this
unit in order to allow all functions to be used
in full. Using an old version may lead to errors
during navigation.
Updating navigation data
To update navigation data visit our website:
www.seat.com.
The navigation data must be installed after
downloading. Navigation is not possible from
the memory card.
Installing navigation data
The installation process takes about 2 hours.
If the Infotainment system is switched off, the
installation process is paused and will auto-
matically resume when switched back on.
●
Switch the ignition on.
●
Insert the memory card containing the nav-
igation data
›››
page 49.
●
Press the Infotainment button

and
then select Settings .
●
In the
System settings
menu, press the
System information function button.
●
Press Update software to import the stored
navigation data.
●
Follow the instructions displayed on the
screen.
Once installed, the memory card can be re-
moved. The memory card must be prepared
for removal
›››
page 49.
CAUTION
Do not remove the memory card while the
navigation data is being installed. The
memory card may be irreparably dam-
aged!
Note
●
The navigation memory card may not be
used as memory storage for other files. The
Infotainment system will not recognise the
files saved on it.
●
SEAT recommends a CLASS 10
1)
memory
card for the use of navigation data. The use
of other memory cards could limit its oper-
ation.
1)
The speed class of an SD card.
59