Seca 654 - Page 13

Overview • 85
English
17-10-07-654-100_01-2020B
2
Cover for infrared
interface
For functional expansions; no function at present
3
Workflow LED
Indicates the status of data recording and data transmission (requirement:
Connection to the seca connect 103 software)
• Illuminated in green: Measurement procedure active
• Flashing green (approx. 5 seconds): Measuring results being sent to the EMR
System (depending on setting)
• Illuminated in green (approx. 5 seconds): Measuring results successfully sent to the
EMR System (depending on setting)
• Illuminated in red (approx. 5 seconds): Error during data transmission or
measurement procedure
NOTE
The data recorded and transmitted are specified in the seca connect 103
software. If you have any queries, contact your administrator or hospital
technician
4
Foot screw Used for precise alignment of the device (4 pcs)
5
Standing aid (optional)
• Compatible: Standing aid seca 455 ➔ Compatible seca products, page 138
• Used to support patients who are unable to stand securely
6
Multifunctional display
Central control and display element
• ➔ Symbols on the multifunctional display (menu), page 87
7
Ultrasonic measuring
rod (optional)
Compatible: Ultrasonic measuring rod seca 257 ➔ Compatible seca products,
page 138
8
Bracket for
multifunctional display
Used to mount the multifunctional display (scope of delivery of the scale) on the
measuring rod
9
Status LED Indicates the operating status of the measuring rod
10
Ultrasound sensors For measuring height
11
Loudspeaker For voice output
12
Connection panel
Used for power supply and data transmission ➔ Interfaces, page 92
13
Casters Used for transporting over short distances (2 pcs)
Item Device component Description