Seca 654 - Restoring factory settings; 8. Hygiene treatment; 8.1 Cleaning

Hygiene treatment • 123
English
17-10-07-654-100_01-2020B
Restoring factory settings 1. Press the key.
The Settings menu is displayed.
2. Press the or key until the Voice guidance menu item is
displayed.
3. Press the Reset item.
4. Press the Factory settings key.
The device will be reset to factory settings.
The following network settings are not reset:
• Server address
•Server port
•WiFi
• Access point
5. Confirm your selection.
6. Confirm the prompt on the display with the key.
You exit the menu automatically.
The device will be reset to factory settings.
8. HYGIENE TREATMENT
WARNING!
Electric shock
The device is not de-energized when the display goes out. Use of
fluids on the device may cause electric shock.
► Disconnect the power supply connector before performing any
hygiene treatment.
► Ensure that no fluids penetrate the device.
NOTICE!
Damage to device
Inappropriate detergents and disinfectants may damage the sensitive
surfaces of the device.
► Use alcohol-based disinfectant (e.g. 70 % ethanol) exclusively.
► Do not use aggressive or abrasive cleaning agents.
► Ensure that no moisture or dust get into the sensors during
cleaning.
8.1 Cleaning
► Use a soft cloth dampened with mild soapsuds to clean the surfaces of
the device.