Seca 654 - 4.4 Symbols on the multifunctional display (menu)

Overview • 87
English
17-10-07-654-100_01-2020B
4.4 Symbols on the multifunctional display (menu)
This section contains information about the display content for configuration
and administration. Information about the display content for measuring
mode is available here: ➔ Symbols on the multifunctional display (menu),
page 87.
The configuration options in the menu are dependent on the device mode
selected:
➔ Changing the device mode, page 106
➔ Functions/device mode, page 134
D
Weighing
technology data
• Weighing ranges: ,
• Max: Maximum load per weighing range
• e: Graduations (calibrated models)
• d: Graduations (non-calibrated models)
• Min: Minimum load per weighing range
E
Display field
Weight
Weight, units:
• Kilograms
• Pounds (non-calibrated models)
F
Display field
Height
Height, for manual input: Press display; units:
•Centimeters
• Feet/inch(es) (non-calibrated models)
G
Display field
“Body-Size-
Indicator”
Available indicators:
• BMI: Body Mass Index (kg/m
2
)
• BSA: Body Surface Area (m
2
)
- BSA (Dubois)
- BSA (Haycock)
- BSA (Mosteller)
•: Waist circumference
• Switch Body-Size-Indicator: Press display field
• BMI/BSA are calculated automatically when the weight and height are available
• : Enter waist circumference
• Function can be activated/deactivated in the menu ➔ Selecting BMI/BSA/Waist
circumf., page 111
H
Additional
functions
• Additional function activated (here: Hold)
• Additional function deactivated
I
• Confirm measuring results and send to EMR System
• Confirm manual inputs
J
• Press briefly: Open menu ➔ Configuration, page 106
• Press and hold (approx. 5 seconds): ➔ Changing the device mode, page 106
K
• Clear measuring results
• Clear manual inputs
• Cancel automated procedures
L
Extended
weighing
functions
• : Non-verifiable function active
• Hold
: Hold function active
• NET: Tara or Pre-tare function active
• PT: Pre-tare function active
Item Display element Description
+ROG
+ROG