Seca 654 - 7.5 Configuring voice guidance; Selecting a language; Setting the volume

Configuration • 119
English
17-10-07-654-100_01-2020B
7.5 Configuring voice guidance
Selecting a language
To change the language, proceed as follows:
1. Press the key.
The Settings menu is displayed.
2. Press the or key until the Voice guidance menu item is
displayed.
3. In the Voice guidance menu, select the Language item.
4. Select a language.
a) Press the arrow keys until the desired language appears on the
display
b) Press the desired language
The setting is active.
5. To exit the menu, press the key.
Setting the volume
The voice output volume can be adjusted in stages (0 = off, 9 = max.).
1. Press the key.
The Settings menu is displayed.
2. Press the or key until the Voice guidance menu item is
displayed.
Device mode Function available
Basic –
Advanced •
Expert •
Service •
Device mode Function available
Basic –
Advanced •
Expert •
Service •