Seca 654 - 12.2 Functions;device mode

134 • seca 655/654
17-10-07-654-100_01-2020B
12.2 Functions/device mode
Function Device mode
Basic Advanced Expert Service
Measure
Calculate BMI/BSA automatically ••••
Measure weight ••••
Record IDs (user/patient)
a.
••••
Enter height manually ••••
Measure height ••••
Permanently display measuring results (Hold) –•••
Submit measuring results
a.
••••
Enter waist circumference –•••
Tare additional weight (tare) –•••
Permanently save the additional weight –•••
Configure
Activate/deactivate announcement of measuring results
(Results)
––••
Activate/deactivate announcement of patient
instructions (Measurement)
––••
Access PDF version of the instructions for use
(QR code)
–•••
Autoclear function: Define time period ––••
Activate Autohold function –•••
Set filter (sensitivity of the scale to patient movements) –•••
Set date format –•••
Set display brightness –•••
Set display language –•••
Read off calibration counter reading (calibrated scales) –•••
Switch over units (non-calibrated scales) ––••
Read off GAL value –•••
Connect device to WiFi network (WPS) ––••
Connect device to WiFi network (manually) ––••
Connect devices to WiFi network (seca connect 103) ––••
Enter IP address ––••
Set volume for voice guidance –•••
Call up menu –•••
Service functions
b.
–––•
Activate/deactivate beeps for ultrasonic height
measurement
––••
Select language for voice guidance –•••
Set standby time –•••
Calibrate ultrasonic height measurement ––••
Switch between BMI/BSA calculation and waist
circumference input
––••
Restore factory settings ––••
Activate/deactivate WiFi module ––••
a. devices with connection to an EMR System or the seca analytics 125 software (via seca connect 103 software)
b. For authorized service technicians only