78 • seca 655/654
17-10-07-654-100_01-2020B
The seca analytics 125 software receives measurement data from the
seca connect 103 software and processes them graphically. The software
therefore assists the physician supervising treatment in evaluating measuring
results or making a diagnosis.
Compatibility Configuration software: seca connect 103: Version 2.0 or higher, no
downward compatibility.
Evaluation software: seca analytics 125: Version 1.0 or higher.
2.4 Patient target group
The device is intended for persons of any age, with the exception of babies.
Limitations in terms of weight and height can arise depending on the compat-
ible seca products used:
➔ Technical data, page 132
➔ Compatible seca products, page 138
2.5 User qualification
Assembly Devices that are shipped partially assembled may only be mounted by suffi-
ciently qualified persons such as specialist dealers, hospital technicians or
seca Service technicians.
Administration/network operation The device may only be set up and incorporated in a network by experienced
administrators or hospital technicians.
Measuring mode The device may only be operated by persons with formal training in the field of
healthcare or medicine.
3. SAFETY INFORMATION
3.1 Safety precautions in these instructions for use
DANGER!
Used to identify an extremely hazardous situation. If you fail to take
note of this information, serious irreversible or fatal injuries will occur.
WARNING!
Used to identify an extremely hazardous situation. If you fail to take
note of this information, serious irreversible or fatal injuries may result.
CAUTION!
Used to identify a hazardous situation. If you fail to take note of this
information, minor to moderate injuries may result.
NOTICE!
Used to identify possible incorrect usage of the device. If you fail to
take note of this information, you may damage the device, or the mea-
suring results may be incorrect.
NOTE
Includes additional information about use of the device.
To Next Page
Loading...
