Optional accessories and spare parts • 137
17-10-07-654-100_01-2020B
12.7 Technical data, ultrasonic height measurement
Metrological data
Voice outputs and acoustic signals The device supports the measurement procedure through acoustic and
optical signals and voice outputs.
The following table provides an overview of the signals and voice outputs of
the device in the sequence of the measurement procedure:
13.OPTIONAL ACCESSORIES AND SPARE PARTS
Technical data, height measurement, ultrasonic
• Measuring range, standard
• Measuring range with standing aid/BIA standing aid
•Graduations
60 cm – 220 cm
100 cm – 220 cm
1 mm
Accuracy:
Measuring range: 100 to 200 cm
Ambient conditions: 20 °C, no air movements, no air movement, no
interfering objects in the vicinity of the measuring device
± 5 mm
Signal/voice output Meaning
Status LED on ultrasound head lights up
continuously
The device is ready for
measurement
“Please stand upright and look straight
ahead.”
Instruction to the patient
Status LED on ultrasound head goes off
The measurement
procedure is in progress
“Do not move. The measurement starts
now.”
Instruction to the patient
Short beeps
The measurement
procedure is in progress
Long beep
The measurement
procedure is complete
“Your weight is (...) kilograms. Your height is
(...) centimeters. Your BMI is (...).”
Announcement of the
measuring results
“The measurement is completed. Please
step off the platform.”
Instruction to the patient
Accessory/spare part Article number
Switch-mode power supply:
100-240 V~ / 50-60 Hz, 12 V= / 1.5 A / 18 W
68 32 10 272
Barcode scanner See recommendation at www.seca.com
seca 463 scanner holder 463 0000 009
seca 459 “panda bear” figure 459 0000 009
Standing aids
See ➔ Compatible seca products, page 138
Measuring rods
Configuration software
Evaluation software
To Next Page
Loading...
