SEW-Eurodrive DH 41B Series - X35: USB Engineering Interface; X36: Ethernet 1 System Bus Interface

6
Electrical installation
Terminal assignment and DIP switches
Manual – DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)
36
Connection type
Spring terminal plug connector
Wiring diagram
X34
1
3
5
2
4
6
Assignment
No. Name Function
X34 1 RS+ Signal RS485+ (COM1)
2 RS+ insulated Signal RS485+ insulated (COM2)
3 RS– Signal RS485– (COM1)
4 RS– insulated Signal RS485– insulated (COM2)
5 DGND Reference potential (COM1)
6 GND insulated Reference potential (COM2)
INFORMATION
For more information on how to connect the DOP11B operator terminal, refer to the
sections "Installation" and "Pin assignment" in the "DOP11B Operator Terminal" sys-
tem manual.
6.2.9 X35: USB engineering interface
Connection type
USB plug connector typeB
Assignment
No. Name Function
X35 1 USB+5V
Default assignment
2 USB-
3 USB+
4 DGND
6.2.10 X36: Ethernet 1 system bus interface
The Ethernet1 system bus interface serves as system bus master of the fast SBus
PLUS
system bus.
Function
Ethernet connection:
• Modbus/TCP
• EtherNet/IP™
• PROFINET IO
22900055/EN – 08/2016