SEW-Eurodrive DH 41B Series - Starting up Units (Online)

7
Project planning and startup with MOVITOOLS
®
MotionStudio
Executing functions with the units
Manual – DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)
61
5. Expand the parameter tree to the node you require.
9007200201958155
6. To display a specific group of device parameters, double-click on the group.
7. Press the enter key to finalize any changes you make to numerical values in the
input fields.
INFORMATION
For detailed information about the unit parameters, refer to the parameter list for the
unit.
7.6.2 Starting up units (online)
Proceed as follows:
1. Switch to the network view.
2. Switch to online mode by using the icon [1].
[1]
18014399693512203
3. Select the unit you want to startup.
4. Choose the command [Startup] > [Startup] from the context menu.
ð The startup assistant is displayed.
5. Follow the instructions of the startup wizard and then load the startup data into
your unit.
22900055/EN – 08/2016