SEW-Eurodrive DH 41B Series - Technical Data of the DHR21 B;41 B Option Card; Technical Data of the Stand-Alone Device

10
Technical data and dimension drawings
Technical data of the DHR21B/41B option card
Manual – DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)
79
DHF21B/41B
DeviceNet connection
(X30D:1–X30D:5)
• 2-wire bus and 2-wire supply voltage DC 24V with 5-pin Phoenix terminal
• Pin assignment according to DeviceNet specification
• Baud rate: 125, 250 or 500kBaud, can be set using DIP switches 2
6
and 2
7
• Bus cable length for thick cable according to DeviceNet specification2.0
AppendixB
– 500m at 125kbaud
– 250m at 250kbaud
– 100m at 500kbaud
• MAC-ID:
– 0 – 63, can be set using DIP switch 2
0
– 2
5
– Max. 64stations
Engineering Additional engineering access via the engineering interface PROFIBUS
(X30P)
10.4 Technical data of the DHR21B/41B option card
INFORMATION
The technical data of the connections that are identical with the DHE21B/41B and
DHF21B/41B option cards are described in chapters "Technical data of the
DH.21B/41B option card" (→2 76) and "Technical data of the DHF21B/41B option
card"(→278).
DHR21B/41B
Part number
• DHR21B: 18236103
• DHR41B: 18216323
Electrical supply
• Installed in MOVIDRIVE
®
MDX61B:
– Power consumption: P
max
= 9.5W
• Installed in the MOVIAXIS
®
MXM master module:
– Power consumption: P
max
= 12W
Ethernet connection
(X30-1, X30-2)
Via RJ45 socket, pin assignment according to IEC11801
Integrated Ethernet switch with auto-crossing and auto-negotiation function
Engineering Additional engineering access via PROFINET, EtherNet/IP
TM
and Modbus
TCP/IP interfaces (X30:1/2)
10.5 Technical data of the stand-alone device
Stand-alone device
Device designs
• DHE21B/41B in UOH11B stand-alone housing
• DHF21B/41B in UOH21B stand-alone housing
• DHR21B/41B in UOH21B stand-alone housing
22900055/EN – 08/2016