Sharp ER-A280F

102
Article Programming
Use the following procedure to select any option included in the article programming group:
The following illustration shows those options included in this programming group.
1 ARTICLE 1 DEPARTMENT:
➡
See “Department” on page 103.
2 PLU/EAN:
➡
See “PLU/EAN” on page 105.
3 PLU RANGE:
➡
See “PLU range” on page 107.
4 SET PLU TABLE:
➡
See “Set PLU table” on page 107.
5 LINK PLU/EAN TBL:
➡
See “Link PLU table (for PLU/EAN link)” on page 108.
6 PROMOTION TABLE:
➡
See “Promotion table” on page 109.
7 EAN NON-PLU:
➡
See “EAN Non-PLU code format” on page 111.
8 PRESS CODE:
➡
See “Press code (for EAN)” on page 112.
9 PLU/EAN STOCK:
➡
See “PLU/EAN stock” on page 113.
10 EAN DELETE:
➡
See “EAN delete” on page 113.
EC
1.
In the SETTING window, select "1 ARTICLE".
• The ARTICLE window will appear.
2.
Select any option from the following options list.
1 DEPARTMENT: Departments
2 PLU/EAN: PLUs/EANs
3 PLU RANGE: A range of PLUs/EANs
4 SET PLU TABLE: Set PLU table
5 LINK PLU/EAN TBL: Link PLU/EAN table
6 PROMOTION TABLE: Promotion table
7 EAN NON-PLU: EAN Non-PLU type code
format
8 PRESS CODE: Press code
9 PLU/EAN STOCK: PLU/EAN stock quantity
10 EAN DELETE: EAN delete
Ψ
Procedure
The screen continues.
ER-A280F_N(SEEG)(E)-6 09.6.18 6:53 AM Page 102