Sharp ER-A280F

144
Program the item as follows:
• RECEIPT LOGO (Use the character entry)
Logo text for the receipt (max. 40 characters x 6 lines)
Entering sequential characters
“ =” will print the corresponding
clerk name in the footer logo message. Enter 12 characters
“ =.”
The programmable number of lines for a message varies according to the following message
types:
• 3-line header message type
• Graphical logo only type
• Graphical logo and 3-line footer message type
• 6-line header message type
• 3-line header and 3-line footer messages type
• 3-line header message, graphical logo, and 3-line footer message type
• Graphical logo and 3-line header and 3-line footer messages type
Please contact your authorized SHARP dealer.
NOTE
■ Receipt logo
Your register can print programmed messages for customers on every receipt.
The logo text is printed in a centering form on the receipt.
Procedure
Message Programming
Use the following procedure to select any option included in the message group:
The following illustration shows those options included in this programming group.
12 MESSAGE 1 RECEIPT LOGO
➡
See “Receipt logo” on page 144.
1.
In the SETTING window, select “12 MESSAGE”.
• The MESSAGE window will appear.
2.
Select any option from the following options list:
1 RECEIPT LOGO Receipt logo
Procedure
▼
ER-A280F_N(SEEG)(E)-7 09.6.18 6:55 AM Page 144