139
• PRICE CONVERT (Use the selective entry)
NO: Does not convert the preset unit prices of Dept./PLU/EAN to the ones of EURO currency in the
automatic EURO modification operation.
YES: Converts the preset unit prices of Dept./PLU/EAN in the automatic EURO modification operation.
The preset rate of the
,
key is applied as the conversion rate, and the calculation method is
set to “division”.
• EURO JOB (Use the selective entry)
NON-COMPUL.: Non-compulsory the automatic EURO modification operation in the X2/Z2 mode after
the preset date.
COMPULSORY: Compulsory the automatic EURO modification operation in the X2/Z2 mode after the
preset date.
When the EURO STATUS of your register is already “D” (i.e. the domestic currency has been
changed to EURO in your register), this programming is disabled.
Program each item as follows:
• DATE (Use the numeric entry)
Preset the date to execute the automatic EURO modification
operation.
Enter the day (2 digits), month (2 digits), and year (2 digits) in
this sequence.
• TIME (Use the numeric entry)
Preset the time of the date to execute the automatic EURO
modification operation.
Enter the hour (00-23)
■ EURO
You can program optional functions for EURO. For the details, refer to EURO Migration Function section.
Procedure
ER-A280F_N(SEEG)(E)-7 09.6.18 6:55 AM Page 139
To Next Page
Loading...
Need help?
General
Weight and Dimensions
