Sharp ER-A280F User Manual

14
■ Inserting the keyboard sheet
Insert the keyboard sheet between the keyboard cover and the cabinet as illustrated below.
1. Turn over the keyboard cover.
2. Insert the keyboard sheet into the slit.
3. Close the keyboard cover.
• Do not spread the keyboard cover too far as it might tear the tabs.
• Replace the keyboard sheet with a new one if by chance it gets wet. Use of a wet keyboard sheet may
cause problems.
• Be sure to use only SHARP-supplied keyboard sheets. Thick or hard sheets make key operations difficult.
• Smooth the keyboard sheet evenly under the keyboard cover, without any folds or wrinkles, to ensure
easier operation.
• If you require a new keyboard sheet, please contact your dealer.
• The keyboard cover will eventually wear out. If your keyboard cover is dirty or broken, replace the cover
with a new one. For details, contact your authorized SHARP dealer.
NOTE
Keyboard sheet
Keyboard cover
ER-A280F_N(SEEG)(E)-1 09.6.12 11:09 AM Page 14

Sharp ER-A280F Specifications

General

Types of payment	Cash
Keyboard number of keys	70
Supported paper width	58 mm
RS-232 ports	4
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	365 mm
Width	330 mm
Height	225 mm
Weight	9000 g