Sharp VL-PD6H User Manual

Appendix
96
SmartMedia™ Card
SHARP
Precautions on handling the
SmartMedia card
• The card is a precision device. Do not bend,
apply excessive pressure, subject to shock,
or drop.
• Do not store or use in a location subject to a
strong electromagnetic field or electronic
noise.
• When not in use, store the card in the
supplied protective case to prevent damage
from static electricity.
• Do not put the card in your pocket or other
unprotected location as it may break due to
pressure applied when you sit.
• Do not store or use in an environment subject
to high temperature and humidity, subject to
lots of dust, or subject to corrosion.
• Do not allow the card to get close to fire or
throw the card in a fire.
• The card has a life expectancy. After
extended use over a long period of time, the
card will become incapable of recording new
information.
• Do not remove the card from the camcorder
or turn off the camcorder power while
recording or erasing data as this may result in
accidental erasure of data or damage to the
card.
• Remove the write-protect seal (if any) before
attaching a card to a commercially-available
PC card adapter.
• Be careful when operating using a
commercially-available floppy disk adapter as
it is possible to write and erase data even
when a write-protect seal is affixed to the
card.
• Always format cards on this camcorder. This
camcorder may not recognize the data on
cards formatted on your computer.
Write-protect
area
Contact area
Index area
Index labels
Write-protect seals
Contact area
• The contact area shows hardware
connections.
• Be careful not to scratch the contact area.
• Do not touch or allow dirt or foreign matter to
attach to the contact area. If the contact area
becomes dirty, gently wipe with a soft, dry
cloth.
Index area
• Affix the supplied index labels to the index
area. Do not affix commercially-available
labels. Use of labels other than those
supplied may result in damage to the card.
Write-protect area
• Affixing one of the supplied write-protect
seals to the write-protect area will disable
recording and erasing of the card, making it
read-only. (This prevents accidental erasure
and recording.) Removing the seal will once
again enable recording and erasing.
• Affix the supplied write-protect seals to the
write-protect area. Do not affix commercially-
available seals. Use of seals other than those
supplied may result in damage to the card.
Write-protect seals
• Affix write-protect seals so that they do not
stick beyond the write-protect area, come
loose or peel off.
• If the write-protect seal becomes dirty, wipe it
gently with a soft, dry cloth.
• Do not re-use a write-protect seal once it has
been affixed and removed.
VL-PD6H/093-103 01.4.24, 0:45 PM96
Downloaded from: http://www.usersmanualguide.com/

Sharp VL-PD6H Specifications

General

Brand	Sharp
Model	VL-PD6H
Category	Camcorder
Language	English