Summary of
Operations
Summary of Operations
25
Useful FeaturesUseful Features
Summary of Operations
Camcorder mode types
Tape Recording mode: For recording motion
and still images on a tape.
Tape Playback mode: For playing back motion
and still images recorded on a tape.
Card Recording mode: For recording still
images on a SmartMedia card.
Card Playback mode: For playing back still
images recorded on a SmartMedia card.
This camcorder includes functions for use as both a video camera for recording and playing back
motion images on tape and as a digital still camera for recording and playing back still images on
a SmartMedia card. One of the following camcorder modes needs to be set before starting any
operations.
Selecting the Camcorder Mode
Power switch
Media Selection
switch
Tape Recording mode Tape Playback mode
1 Set the Media Selection
switch to TAPE.
1 Set the Media Selection
switch to TAPE.
Card Recording mode Card Playback mode
1 Set the Media Selection
switch to CARD.
1 Set the Media Selection
switch to CARD.
Caution:
• Do not change the camcorder mode by operating the Media Selection switch during recording or
playback, as this may cause damage to the tape or SmartMedia card.
Lock button
2 Hold down the Lock
button and set the
Power switch to
CAMERA.
2 Hold down the Lock
button and set the
Power switch to VCR.
Lock button
2 Hold down the Lock
button and set the
Power switch to VCR.
Lock button
Lock button
2 Hold down the Lock
button and set the
Power switch to
CAMERA.
VL-PD6H/025-028 01.4.24, 0:22 PM25
Downloaded from: http://www.usersmanualguide.com/