EasyManua.ls Logo

Sharp VL-PD6H

Sharp VL-PD6H
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Useful
Features
40
Infrared remote
sensor
Approximate operating
range of remote control
5 m
Transmitter
Using the Infrared Remote
Control
Use the supplied infrared remote control to
operate the camcorder from a distance, such
as when you want to record yourself in a scene,
or when the camcorder is connected to a TV for
use as a VCR.
Turning On the Infrared Remote
Control Mode
1 Press the MENU/DISPLAY button until
the menu screen appears.
2 Turn the SET-PUSH dial (Q) to select
“REMOTE”, and then press the dial (W)
to select “ON”.
3 Press the MENU/DISPLAY button to
turn off the menu screen.
Operating the Infrared Remote
Control
1 Open the LCD monitor completely (Q),
and then rotate it 180° vertically (W).
4 Aim the remote control transmitter at the
infrared remote sensor of the camcorder,
and press the control buttons for
operation.
DIGITAL
TAPE
16 9
SPE ED
END
[
MENU/DISPLAY
]
ZOOM
OFF
OFF
ON
SP
M
ENUAUTO
-----------
4
----------
REMOTE
ON
DIS
Q
W
PUSH
STILL Recording button [pp. 38, 39, 71]
RECord START/STOP button [pp. 19, 71]
ZOOM (CAMERA/
PLAYBACK) buttons
[pp. 20, 60]
Playback control
buttons [pp. 22, 78]
VOLUME buttons [p. 22]
T/C (Time Code)
ON/OFF button
[p. 45]
Special effect tape playback (Still, Reverse
Playback, Slow, and Frame Advance) buttons
[pp. 24, 44]
DATE DISPLAY
button [p. 16]
Shift buttons [pp. 60, 74, 86, 87]
Notes:
Be careful not to allow direct sunlight or bright
light from interior illumination to fall onto the
remote sensor, as this may prevent the remote
control from operating properly.
Be sure that there are no obstacles between the
remote control and the remote sensor.
When the battery is depleted and the remote
control does not operate, replace it with a new
CR2025 lithium battery (see page 14).
COMPOSITE
buttons [pp. 74, 86]
INDEX SEARCH buttons [p. 87]
W
Q
2 Set the Media Selection switch on the
camcorder to TAPE or CARD.
3 Set the Power switch on the camcorder
to CAMERA or VCR.
VL-PD6H/029-043 01.4.24, 0:21 PM40
Downloaded from: http://www.usersmanualguide.com/

Table of Contents

Other manuals for Sharp VL-PD6H

Related product manuals