Advanced Features
Playback
Advanced
Features
69
Selecting the Audio Playback
Mode
You can select any of the following audio
playback modes.
Audio 1+2
• 12-bit recording in stereo (Audio 1 and Audio
2 channels)
• 16-bit recording in stereo (left and right
channels)
Audio 1
• 12-bit recording in stereo (Audio 1 channel
only)
• 16-bit recording in mono (left channel only)
Audio 2
• 12-bit recording in stereo (Audio 2 channel
only)
• 16-bit recording in mono (right channel only)
1 Play back a Mini DV cassette with
dubbed audio.
2 Press the MENU/DISPLAY button until
the menu screen appears.
3 Turn the SET-PUSH dial (Q) to select
“AUDIO”, and then press the dial (W) to
select the desired audio playback mode.
Note:
• The audio playback mode indicator, “AUDIO”, is
displayed in different colours depending on the
recording mode (12- or 16-bit) used for the
recording being played back. A white display
indicates 12-bit recording mode, and a green
display, 16-bit recording mode.
AUDIO
1
+
2
Connecting to a Personal
Computer (Still Image
Transfer)
This camcorder can transfer still playback
images in Tape Playback mode or still images
in Tape Recording mode to a personal
computer by using the optional VR-PK100S
PixLab Video Capture Software.
PC COMMUNICATION
To RS-232C port
(D-sub 9-pin port)
RS-232C connecting
cable*
To PC COMMUNICATION
jack
*Included with the optional VR-PK100S PixLab Video
Capture Software.
Notes:
• Use Sharp PixLab Browser and PixLab TWAIN
(YUV) Module to transfer images to a personal
computer.
• Images with the following functions cannot be
transferred to a personal computer.
— Tape Playback mode: Playback Zoom, Picture
Effect Playback
— Tape Recording mode: Digital Zoom, picture
effects
• Still images recorded on a SmartMedia card
cannot be directly transferred from the
camcorder to a computer. See page 90 for
transferring the data on a SmartMedia card to
your computer.
• For details, see the operation manual of the
optional PixLab Video Capture Software.
Audio playback
mode indicator
MUL T I F RAME
AUDIO
END
[
MENU/DISPLAY
]
1
1
+
2
M
ENU
1
+
21 2
REMOTE
ON
PICTURE
CAPTURE
EFF .
-----------
2
----------
Q
W
PUSH
4 Press the MENU/DISPLAY button to
turn off the menu screen.
• The selected audio playback mode
indicator is displayed.
VL-PD6H/060-069 01.4.24, 0:19 PM69
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
