Sharp VL-PD6H

Advanced
Features
68
To pause audio dubbing
Press the SET-PUSH dial.
To quit audio dubbing
Press the MENU/DISPLAY button. The audio
dubbing screen turns off.
If you wish to change the dubbed audio
or dub additional scenes
1 Press the MENU/DISPLAY button to
turn off the audio dubbing screen.
2 Repeat steps 1 to 5 above.
Notes:
• Audio dubbing cannot be used with record-
ings made in LP mode.
• We recommend that you use Audio Dubbing
only with recordings made with this camcorder.
Use of recordings made with other digital video
equipment may result in poor audio quality.
• Audio dubbing will automatically pause if the
original audio changes from 12-bit mode to 16-
bit mode or vice versa. Press the SET-PUSH dial
to resume operation.
• Audio dubbing will automatically stop if a portion
recorded in LP mode is encountered.
• You can play back the dubbed audio and the
original audio together or separately (see
“Selecting the Audio Playback Mode” on next
page).
Audio Dubbing
1 Play back the recorded Mini DV cassette
and locate the tape position where you
wish to start audio dubbing.
2 Press the Play/Still button (
) to
pause playback.
3 Press the MENU/DISPLAY button until
the menu screen appears.
4 Turn the SET-PUSH dial (Q) to select
“AUDIO DUB”, and then press the dial
(W) to display the audio dubbing screen.
PICTURE
PB EFFECT
PB
INDEX SEARCH
COMPOSITE
ZOOM
END
[
MENU/DISPLAY
]
OFF
OFF
----------- 1 ----------
M ENU
PB EFFECT
PB ZOOM
AUDIO DUB
OFF
OFF
----------- 2 ----------
M ENU
AUDI O DUB
START
STOP
END
[
MENU/DISPLAY
]
Q
W
PUSH
COMPOS I T E
INDEX SEARCH
5 Press the SET-PUSH dial to begin audio
dubbing. Record your narration.
AUDI O DUB
START
STOP
END
[
MENU/DISPLAY
]
AUDI O DUB
START
STOP
END
[
MENU/DISPLAY
]
PUSH
VL-PD6H/060-069 01.4.24, 0:19 PM68
Downloaded from: http://www.usersmanualguide.com/