Operation
References
8
The SmartMedia card is not inserted or is inserted improperly. Check how
the card is inserted (see page 70).
The capacity of the SmartMedia card is full and cannot store any more
images. Delete unnecessary images (see page 81) or replace the card with
a new one (see page 70).
The SmartMedia card has no images recorded in the format the camcorder
can recognize.
The images in the SmartMedia card are corrupted or recorded in a format
which is not compatible with this camcorder. Format the card to use it with
this camcorder (see page 77).
The SmartMedia card has not been formatted with this camcorder. Format
the card (see page 77).
A SmartMedia card with a write-protect seal is inserted. Remove the write-
protect seal to record images on the card (see page 96).
You are trying to delete a protected image. Cancel the protection setting
(see page 80).
The selected image cannot be read by this camcorder. Format the card to
use it with this camcorder (see page 77).
Displayed
for 5 seconds
Description of warning
Note:
•
indicates a flashing display.
NO
MEMORY CARD
MEMORY
FULL
CARD
NO DATA ON
MEMORY CARD
MEMORY CARD
ERROR
FORMAT
MEMORY CARD
MEMORY CARD
PROTECTED
PROTECTED
DATA
MEMORY CARD
READ ERROR
CANNOT
STORE DATA
DATA NOT
FOUND
The SmartMedia card cannot be recorded on due to a problem with the
card or data on the card. Replace the SmartMedia card (see page 70).
The ID of the SmartMedia card and the tape do not match for Index
Playback, or no index is recorded on the SmartMedia card. Insert a card
with the indices for the tape in question or record indices and then perform
Index Playback (see page 87).
VL-PD6H/004-008 01.4.24, 0:25 PM8
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
