10
© 2012 SHFL entertainment, Inc.
MD2® CR
Service Manual 20121015
Confidential
Verifying Changes
Always check the values after entry to verify that the changes have been
made and saved.
Card Recognition Function
The message panel item allows the Card Recognition feature to be set to
either ON or OFF. The message panel will display:
Press the RED button to toggle between YES and NO. Press the GREEN
button to select and advance to the next menu selection.
A password is not required to change the Card Recognition option.
Password
The password must be entered to inspect or change most shuffler data.
The message panel will display:
To enter the password, press the RED button to advance the cursor to the
desired character, and press the GREEN button to change the value of the
character. After entering the correct password, return the cursor to the
far right, and press the GREEN button.
Passwords
There are two primary levels of passwords, the Administrator password
and a General password. Some of the web pages and associated functions
are not available when using the General password.
Automatic Setup
This menu item allows calibration of the machine for the type of cards to
be used. One 52 card deck is used. The password must have been
previously entered.
Enter Password
00000_
Card Recognition? Yes/No?
To Next Page
Loading...