SHFL MD2 CR - Step By Step Shuffle Mode; Sensor Status Display

45
© 2012 SHFL entertainment, Inc. MD2® CR Service Manual 20121015
Confidential
Downloading Card Deck Information to the Shuffler
1. Open “Internet Explorer” (or alternate browser).
2. Type http://169.254.0.1/ (when using a stand-alone connection) into
the address box in the web browser. Click on the “Go” or Enter button,
if necessary.
3. Minimize the resulting ‘Login’ web page.
4. Open the Deck Manager. Cycle power ‘ON’ to the shuffler to obtain the
device address automatically.
5. If needed, enter the path/location on the computer of the card deck
files in the “Library Folder” text box.
• If downloading all files in the library, click to select the “Install using
Decklist.txt” check box and then click to activate the “Install Files
onto Device” button.
• If downloading only selected decks, click to activate the “Install Files
onto Device” button.
6. Type the SID deck number(s) into the “Deck ID List” check box. Click
on “OK”. The download will begin.
Upon completion of the download, the last line appearing in the Deck
Manager window will read “Finished installing files onto device
169.254.0.1”. Close the Deck Manager.
1. Maximize the Login web page. Type the password to log in.
2. Open the Deck Library web page.
3. Click on either the ‘Refresh’ or ‘Save Changes’ buttons at the bottom
of the Deck List
4. After the window refreshes, verify that the downloaded deck(s) appear
in the Deck List.
Click the Menu column box to make the selected decks available for
selection on the shuffler (Maximum 10). Click the ‘Save Changes’ button
to save the selection(s).