11
© 2012 SHFL entertainment, Inc.
MD2® CR
Service Manual 20121015
Confidential
The message panel will display:
To begin calibration, push the RED button. The machine will display:
Load the 52 cards and push the GREEN button to start the Automatic
Setup process. When finished, the message panel will display:
Both elevators will rise. Remove the cards from the Platform. The new
gripper and Platform values will now be saved. Push the GREEN button to
continue.
Resetting Shuffle Cycles
This menu item displays the total number of shuffling cycles since the
last reset– and allows resetting the cycles to 0. Press the RED button to
reset.
Resetting History Log
Press the GREEN button to advance to Reset History Logs.
To reset all available data in the history log, press the RED button.
Note
Resetting this log will permanently erase the data currently in the log.
Automatic Setup
To Start Push RED
Auto Setup in Progress
Push GREEN Button
Setup Complete
Push GREEN to Continue
Reset History Logs
Setup Complete
Grip: 277, Plat: 294
Reset Cycles
005714
To Next Page
Loading...
