SHFL MD2 CR - Network IP and DHCP Settings

15
© 2012 SHFL entertainment, Inc. MD2® CR Service Manual 20121015
Confidential
Press the RED button. ‘Enable Network Yes/No?’ will appear. Press the
RED button to toggle from ‘Enabled’ to Disabled’. Verify that ‘Network
Enabled’ is selected.
Press the GREEN button. The following IP addresses and the subnet mask
can be individually modified when the shuffler is connected to a dynamic
server network. Press the RED button to move the cursor. Press the
GREEN button to change the digits.
Press the GREEN button.
Press the GREEN button.
Press the GREEN button. Press the RED button to toggle from ‘Enabled’ to
Disabled’. Verify that ‘DHCP Disabled’ is displayed (for a static, stand-
alone network configuration).
Press the GREEN button to continue.
Exiting Setup Menu
To exit the Setup Menu, turn the shuffler OFF.
Enable Network Yes/No?
Network Enabled
Enter CardRec IP Address
IP: 169.254.0.1 _
Enter Server IP Address
IP: 0.0.0.0 _
Enter Subnet Mask
SNM: 255.255.0.00 _
DHCP YES/NO?
DHCP Disabled