42
© 2012 SHFL entertainment, Inc.
MD2® CR
Service Manual 20121015
Confidential
Figure 6-4. Card ID Deck Calibration Web Page
Under Current Deck, verify that the
Deck Number (SID #)
is correct
before making any changes.
The Region of Interest (ROI) parameters define the target area for the
camera. This image is viewed by clicking the Region of Interest button
under the Display Images section. The combined rank and suit images
should be positioned near the vertical center of the ROI, if possible. The
position is adjustable by modifying the V Offset parameter. It may be
necessary to adjust the size of the ROI by modifying the V Lines and/or H
Lines to eliminate from the image any unwanted shadows or card-center
art work, for example.
The Vertical Framing and Horizontal Framing parameters are used to
isolate the rank and suit within the ROI. The Rank Width and Suit Width
parameters are the vertical depth (as viewed on-screen) in pixels of the
rank and suit images, respectively. See Figure 6-5.
To Next Page
Loading...