Operating Instructions Chapter 13
C4000 Palletizer Std./Adv.
C4000 Fusion
8012249/YT69/2016-02-25 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 117
Subject to change without notice
Ordering information
Part Part number
Other accessories
Mounting kit 2: pivoting (swivel mount), 4 pcs. for any protective field
length
2019659
Mounting kit 6: pivoting (side bracket), 4 pcs. for any protective field
length. For higher vibration and shock exposure
2019506
Reinforced stainless steel bracket, pivoting (swivel mount) 4 pieces
for all protective field lengths (vibration load 5 g/10E55 Hz, impact
load 10 g/16 ms)
2026850
Floor stands (quantity 2, height adjustable, for sender or receiver) 2041661
AR60 — laser alignment aid (does not require connection to power
supply)
1015741
AR60 adapter for C4000 (2 pieces recommended for the alignment of
all axes)
4032461
UE402 switching amplifier: expands the C4000 with the functions
bypass and operating mode switching
1023577
Connection cable M8× 4/DESub 9Epin (DIN 41642); for connecting the
configuration connection to the serial interface on the PC
If you need an RSE232/USB converter for your PC, then we
recommend an adapter cable manufactured by Spectra
Computersysteme GmbH (see www.spectra.de).
2 m 6021195
8 m 2027649
Power supply 24 V, 2.1 A, 100/240 V AC, 50 W 7028789
Power supply 24 V, 3.9 A, 120/240 V AC, 95 W 7028790
Accessories already included
Sliding nuts for side bracket, 4 pcs. 2017550
CDS (Configuration & Diagnostic Software) on CDE ROM including
online documentation and operating instructions in all available
languages
2032314
To Next Page
Loading...
